Need bolt size for front sway bar brackets

[merlot4]

Since mine have been lost, I would appreciate it if anyone can tell me the size/length of the bolts that hold on the front sway bar brackets. Thanks!

[merlot4]

My understanding is that the bolts (2) for a bracket (1 of 2) that holds the bushing and secures the front sway bar are:

M10x20mm class 10.9 (10.9 designates very high strength)

I don't know if the thread pitch is 1.5 (coarse), or 1.25 (fine), but assume 1.5 is correct; if not the other is available. If you have never looked at the McMaster-Carr website, it's a paradise of mechanical parts from a highly reputable company.
https://www.mcmaster.com/

I hope no one needs these parts, and that it helps if you do.

[merlot4]

The (two) bolts for the bracket that holds the bushing and secures the front sway bar are:
Flanged M10x20mm, coarse thread pitch 1.5, 10.9 strength class. The bolts are available from Amazon, Ebay, and McMaster-Carr, and doubtless other places

The bushings I used are made by AC Delco. Make certain the parts you look for match your car.

The bushings are available from Amazon, and some auto supply stores.
ACDelco Gold 45F2119 (19465520) Front Suspension Stabilizer Bar Bushing Kit