Announcement

Collapse
No announcement yet.

hardtop protection strip and thunderbird fender script

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by AZTB View Post
    I use this product from 3M for the protection strip...cut it to size (I still have the original strips with car from Ford - I use them as template to cut the 3M product). It protects the sail panel perfectly.

    Snip20211129_1.png
    That's a great idea, using the original strips as templates. I'll dig mine out to scan and put them here for others' use.
    Now when you're feelin' low
    And the fish won't bite
    You need a little bit o' soul
    To put you right

    Comment


    • #17
      I used the stuff that people use to plasticwrap cars I chose black(probably should have used flat black) aligned it with the window weather strip on the left door around the back to the right door. seems to work and looks ok with top off and of course covered up when top is on
      figured I needed something here

      Comment


      • #18
        To hippy_mailman,
        In your first photo you may want to explain for those who may not know what those little droplet looking things are.
        Bird is the word.....
        Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats. H. L. Mencken US editor (1880 - 1956)

        Comment


        • #19
          Originally posted by RustyFrye View Post
          To hippy_mailman,
          In your first photo you may want to explain for those who may not know what those little droplet looking things are.
          to be honest I wish I could!! that was a few years back and had it done by a detail/tint/autowrap guy I guess it was rain here in the northwest,yep is sometimes sees rain. or its a bit of dust either way it was not permanent
          figured I needed something here

          Comment


          • #20
            Originally posted by Bobnoir1 View Post

            That's a great idea, using the original strips as templates. I'll dig mine out to scan and put them here for others' use.
            The problem is, the four strips are VERY LONG and curved. 'Not sure how best to get templates to those who might be interested.

            Comment


            • #21
              Originally posted by JerriLampon View Post
              The problem is, the four strips are VERY LONG and curved. 'Not sure how best to get templates to those who might be interested.
              Using the 4-inch-wide 3M tape works well for the template, Jerri - I've done it for years.

              Comment


              • #22
                For anyone who doesn't have one, instructions!

                T-Bird Instruct1.jpg
                A bit wrinkled, but so am I.

                Comment

                Working...
                X