I have not been putting my soft top boot on because it is so hard to snap it down. Saw some replacement boots while in Dearborn and was about to order one when I figured if the original snaps don't work well the new ones won't either. Had previously used a hammer to secure them but today I just pushed firmly and it snapped in place. Possibly if I put some WD40 on the snaps they will be easier. Anyone else have this problem and suggestions?
Announcement
Collapse
No announcement yet.
soft top boot
Collapse
X
-
Re: soft top boot
and then along comes Dot...
IF you scroll down far enough on my interior page, you will find info on care of snaps & installing the tbird boot:
http://www.portholeauthority.com/the...nter.html#boot
(and some of those tips were gleaned from previous posts on this site, including how to install the 02 boot. Thanks! TBNers.)Limited Edition databases for 007 msg..#26 , PCR sticky, and Cashmere msg.#64
......
Porthole Authority
.
Comment
-
Re: soft top boot
Originally posted by TomTabor View PostPossibly if I put some WD40 on the snaps they will be easier. Anyone else have this problem and suggestions?Originally posted by Gobird View PostTom, Try a small amount of white lithium grease on each one.
BE VERY CAREFUL WHEN APPLYING ANY TYPE OF GREASE
iT CAN AND WILL BLEED THRU IF APPLIED TO HEAVILY.sigpic
“THE EDGE,there is no honest way to explain itbecause the only people who really know where it isare the ones who have gone over.”
Comment
-
Re: soft top boot
Thanks for all your suggestions. I put Vaseline on the snaps and within a few minute I could un snap them and snap em together again though it was still a bit difficult but not impossible as before. My guess is they will be even easier tomorrow. Really appreciate the 11 responses Tom Tabor
Comment




Comment